Embedded Files
Please note this is still being tested on the X-Carve. Detailed plans hopefully soon.
BOM:
- 2 HGH15R 300mm with 4 HGH15CA
- 300mm 2080 Misumi Extrusion
- 8mm Metric Acme Lead Screw (cut to 350ish mm)
- Lock Collar x 2
- Ball Bearing 688Z 8x16x5 x 2
- 6mm Aluminum Spacers X 2
- Anti-Backlash Nut Block for 8mm Metric Acme Lead Screw
- Shim - 12 x 8 x 1mm x 2
- M4 14mm Socket head cap screws x 10
- M4 20 series T-Nuts x 10
- M4 16mm button head cap x 16
- M5 20mm x 8
Weight with 1/2" Corian plates 6lb 6oz
Current GRBL Settings (Still testing)
Current GRBL Settings (Still testing)
$24=25.000 (homing feed, mm/min)
$25=500.000 (homing seek, mm/min) Changed due to increased z rate
$26=250 (homing debounce, msec)
$27=2.000 (homing pull-off, mm) this is due to the hall effect sensors I use for homing switches
$102=100.197 (z, step/mm)
$112=2000.000 (z max rate, mm/min)
$122=100.000 (z accel, mm/sec^2)
Report abuse